Kamper47Winkel's avatar

Birthday: 04/20

Contact

  • Add to Friends
  • Send Message
  • Trade Items

Equipped List

Interest Tags

Remind me to update my interests.

Wish List

 

About

Today we're going to look at the foglights and we're going to be setting up the 9012 LED bulbs on the Honda Accord fog lights. This is an H8 bulb type.

Subscribe our web site if like our posts.



First, we're going to begin by eliminating the black bezel, in order to eliminate this black bezel. Initially, you need to get rid of a screw from under the car. We just need to loosen it a couple turns, that way we can move it out. There are two holes in the black piece plastic, this hole that's closest to the center of the cars and truck is where you're going to insert a screwdriver. You only require to loosen a couple of turns to get it, so you can get the black bezel out. There's a hook shape and so you can get it to screw in there. What if you take your screwdriver will straight up through a loop in, just loosen it a couple turns and you'll be able to pop out the bezel.



Next, after you've loosened the screw you might take a plastic tool or a butter knife wrapped with electrical tape, all you require to do is slip your tool under the gap and get a pup you're going to bring up.



It will pop out once you get it loose, and after that you're going to pull up and these clips will come out. Just 2 more screws that you need to remove, there's one of them below the housing and the other one is a bit much deeper inside just require a Phillips screwdriver to take those 2 out.



The assembly was out, there's the bulb there and then all you require to do is unclip the bulb and then twist the bulb counterclockwise to pull it out. Just press on the tab and slide it out and here you twist it comes out. We're going to take the light headlight LED system and it installs simply the same way. Take the real estate line up the three prongs, twist clockwise to lock it in place and ensure you push until the tab is secure and after that you simply reverse the installation it can be a little tricky to get it to line up.



Now that we've got it set up all you got to do is turn your headlights on and make sure the fog lights are on to check them out.

My Aquarium

Your aquarium is undergoing maintenance!

Friends

Comments

Signature

 

Recent Visitors

Forums

Posts per Day: 0.00

Total Posts: 0

My Playlist

You currently have zero playlists!