|
|
|
|
|
|
|
|
|
 Posted: Wed Jun 28, 2006 3:01 pm
right now i have a bonedaddy bl, im converting it to a speed ball marker with custom products 14 barrel, dead on paintball 8 stage x core expantion chamber, crome drop forward (not sure what it is) e frame led , a sight rail mounted backwars to act as a beaver tail and the frame dident have the same screw holes as the drop or asa so i had to jimmy rig a piece to make it fit, i also got a o ring mod ( i made it) where there is a o ring super glued to the bolt so the original bolt isent so crappy, i tested it on a gravity hopper, clicking 12 or 13 bps ( i know the hopper doesent feed that fast) but the point is there wasent a single chop in a full 200 rounds and this marker doesnt have eyes, i want suggestions on what i should get next, like a list the stuff i need in order of importance, and i dont have a paintball store with in a 100 mile radious so i gotta get it all on ebay, and i dont want suggestions like a new marker cause the point is to just see if i can make a cool speed ball marker out of something that is crap.
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Wed Jun 28, 2006 11:04 pm
Speedball, i'd try to snatch some kind of electronic trigger and see how you fair with that.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Thu Jun 29, 2006 1:54 pm
Chrisb319 Speedball, i'd try to snatch some kind of electronic trigger and see how you fair with that. agreed without an electronic trigger its hard to hit those important speeds, even with a 15 bps cap, with a regular trigger it gets hard, to shoot it constantly and cosistantly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Thu Jun 29, 2006 8:39 pm
1. since u already have an LED E-Frame, get a motorized hopper probably a Revvy 12v, especially since u dont have eyes
2. get a new bolt like a Kingman ACS bolt, but if u cant get one of those i would recommend a Shocktech bolt(cause jimmy rigging is ususally not a good idea, and the ACS will stop choping even without eyes, also this is assuming that your bonedaddy can use the same bolts as Spyders)
3. get an actual beavertail
4. i would take off the drop, but if u wanna use one get one with both types of screw sets
5. u got a good barrel, i also have a 14in CP barrel on my cocker
6. if u run on C02 your exp chamber is fine, but i would look into some palmer regs that are made for use with C02
those are just my suggestions, i think that would make a decent speedball marker out of your bonedaddy
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Thu Jun 29, 2006 9:30 pm
Also, just noticed today try using a 9oz tank it's significatly lighter than a 20 oz it will make it easier to run from bunker to bunker.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Sat Jul 01, 2006 7:05 am
Chrisb319 Speedball, i'd try to snatch some kind of electronic trigger and see how you fair with that. thats what the e marker frame is for, its got a 50 gram on it with semi, 3 burst and full auto the burst and auto have two diffrent speeds. or do you mean a flat trigger?
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Sat Jul 01, 2006 7:15 am
Phantom_Renegade 1. since u already have an LED E-Frame, get a motorized hopper probably a Revvy 12v, especially since u dont have eyes 2. get a new bolt like a Kingman ACS bolt, but if u cant get one of those i would recommend a Shocktech bolt(cause jimmy rigging is ususally not a good idea, and the ACS will stop choping even without eyes, also this is assuming that your bonedaddy can use the same bolts as Spyders) 3. get an actual beavertail 4. i would take off the drop, but if u wanna use one get one with both types of screw sets 5. u got a good barrel, i also have a 14in CP barrel on my cocker 6. if u run on C02 your exp chamber is fine, but i would look into some palmer regs that are made for use with C02 those are just my suggestions, i think that would make a decent speedball marker out of your bonedaddy thanks dude most of those parts i can get a hold of around here except the revvy and the drop, also its a spyder clone so it shold fit. ill get right on it.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Sat Jul 01, 2006 7:25 am
Chrisb319 Also, just noticed today try using a 9oz tank it's significatly lighter than a 20 oz it will make it easier to run from bunker to bunker. i got alot of tanks, i got a one 7 three 9's and one 12 and one 20 but i only took the 7 and 20 when i moved the rest are at my parents house,lol
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Sun Jul 02, 2006 12:46 am
bonedaddy450 Phantom_Renegade 1. since u already have an LED E-Frame, get a motorized hopper probably a Revvy 12v, especially since u dont have eyes 2. get a new bolt like a Kingman ACS bolt, but if u cant get one of those i would recommend a Shocktech bolt(cause jimmy rigging is ususally not a good idea, and the ACS will stop choping even without eyes, also this is assuming that your bonedaddy can use the same bolts as Spyders) 3. get an actual beavertail 4. i would take off the drop, but if u wanna use one get one with both types of screw sets 5. u got a good barrel, i also have a 14in CP barrel on my cocker 6. if u run on C02 your exp chamber is fine, but i would look into some palmer regs that are made for use with C02 those are just my suggestions, i think that would make a decent speedball marker out of your bonedaddy thanks dude most of those parts i can get a hold of around here except the revvy and the drop, also its a spyder clone so it shold fit. ill get right on it. sweet. post a pic when u be done, cause i wanna see it
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Sun Jul 02, 2006 6:00 am
Phantom_Renegade bonedaddy450 Phantom_Renegade 1. since u already have an LED E-Frame, get a motorized hopper probably a Revvy 12v, especially since u dont have eyes 2. get a new bolt like a Kingman ACS bolt, but if u cant get one of those i would recommend a Shocktech bolt(cause jimmy rigging is ususally not a good idea, and the ACS will stop choping even without eyes, also this is assuming that your bonedaddy can use the same bolts as Spyders) 3. get an actual beavertail 4. i would take off the drop, but if u wanna use one get one with both types of screw sets 5. u got a good barrel, i also have a 14in CP barrel on my cocker 6. if u run on C02 your exp chamber is fine, but i would look into some palmer regs that are made for use with C02 those are just my suggestions, i think that would make a decent speedball marker out of your bonedaddy thanks dude most of those parts i can get a hold of around here except the revvy and the drop, also its a spyder clone so it shold fit. ill get right on it. sweet. post a pic when u be done, cause i wanna see it this is stock  this is woods ball set up and this is what it is now and when i finish i will post the final it may take a while. P.S. sorry for the insainly large photo i dont know how to resize.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reply
