Welcome to Gaia! ::

Name: Origami binding
Chakra Points: 300
Requirements: 2 or more pieces of paper
Description: The user can bind two or more pieces of paper as if they were one, or held together with strong glue. This is required for later jutsu, and can be used for some custom building at any time.

Name: Origami hardening
Chakra Points: 300
Requirements: paper
Description: The user flows there chakra into paper instantly making it perfectly flat and hard. This sharpens the edges and makes the body extremely resistant to tearing. This technique is a requirement for many jutsu.

Name: Origami
Chakra Points: 300
Requirements: Paper
Description: Using there chakra, the ninja can fold paper into various origami shapes. These can be anything that can be made with 1-3 sheets pf paper. This can be used to save time with other jutsu but is not a requirement for all.

Name: Origami Shuriken
Chakra Points: 300
Requirements: Oragami OR a pre-folded piece of paper/Origami hardening
Description: The user takes a shuriken shaped piece of paper and hardens it to the strength of metal. This makes it just as effected as a normal shuriken with half the wight and in many cases sharper.

Name: Oragami clone
Chakra Points: 800
Requirements: Origami binding/paper=to body mass
Description: This makes a featureless clone of the user formed out of paper. The clone is more durable than a normal clone and the hands and feet can be hardened into blades. The clones movement is sluggish and 1-3 can be made at a time. This clone can not use jutsu.

Name: Explosive tag folding
Chakra Points: 500
Requirements: Explosive tags/Origami
Description: The user can fold explosive tags into their techniques without destroying the seal used to make the tag explode. This is limited however, as to many tags will make an unstable jutsu.

Name: Origami Plane
Chakra Points: 500cp
Requirements: Origami or pre-folded paper/Origami hardening/paper
Description: The user molds paper into a paper plane or something else of the same size like a butterfly or a dragonfly. any edges or points are hardened to be a blade or sharp. up to 5 can be made at one time.

Name: Origami Dagger
Chakra Points: 800cp
Requirements: Origami/Origami Hardening/Origami binding
Description: The user molds paper with their chakra causing it to take the shape of a dagger of something of equal length. This dagger is stronger than a normal blade, and can cut significantly better and cleaner.

Name:
Chakra Points:
Requirements:
Description:

Name: Earth to Sand
Chakra Points: 2000
Requirements: Sand Control
Description: This technique allows the ninja to turn just about anything solid and not made of metal into sand.
____________

Name: Desert Funeral
Chakra Points: 2000
Requirements: Sand Coffin
Description: the ninja can do this jutsu after they trap a target with Sand Coffin. The sand then covers there enemy's body completely in sand and almost instantly crushes them.
____________

Name: Sand Golem
Chakra Points: 2000
Requirements: Sand Control
Description: The user creates golems out of sand, that act as clones and will fight for you.
____________

Name: Sand Armor Lvl 3
Chakra Points: 1500
Requirements: Sand Armor Lvl 2
Description: The user creates a thin layer of sand over their entire body, giving them decent minor that can withstand decent blows. The force required to break it is much larger than Lvl 2, and it begins to repair itself almost instantly. The sand is completely unnoticeable until broken.

Name: Desert Avalanche
Chakra Points: 2300
Requirements: Sand Control
Description: The user gathers up an excess amount of sand from under the ground and brings forth an enormous wave that towers over and then wipes out the battle field.