((WARNING: DO NOT BUILD THIS PIPE WHEN STONED, THERE IS DANGEROUS MACHINERY INVOLVED.))
Hi kids!
So... I made this guide to making your own pipe.
Its pretty easy to do, plus the materials are pretty easy to find.
Let's get started shall we?
MATERIALS
-Wooden block (approx. 1.5'' thick, 4'' long, 2'' wide)
-Drill with relatively large driller things
-Sanding paper
-Stainless steel screen (Or brass, but brass is harder to find)
-Glue (optional)
INSTUCTIONS
1)Sand the edges of the wooden block.
2)Drill a hole through the block horizontally.
3)Drill a hole though the block vertically, so it meets with the other hole. Make sure you do not go past the horizontal hole.
Now your block should look like this:
4)Inset the screen into the hole, this will act as your bowl. If the bowl is too small, use the sanding paper to make it bigger. If you want to, glue the parts that are sticking up, down.
(The yellow stuff is my glue)
5) Smoke some nice ganja. Use the horizontal hole farthest away from the screen hole to suck the smoke, and when toking cover the other hole with your finger.
NOTE: Since this pipe is made out of wood, it may only last 9 uses before it burns. But I mean, its better than nothing, right?
