When removing cabinets as part of a kitchen remodel, make sure you don't just unscrew and yank them off the wall. You will more than likely end up taking some or all of the drywall off with you. Take time and care to remove each and every screw, and use a utility knife around the edges to break the caulking that was most likely used to seal between the cabinet and the wall.
Patch holes in drywall using https://pumpit.info/amenagermamaison carefully over the patch, allow to dry, and then sand to smooth.
http://www.youtube.com/watch?v=e1PttH1bidQ
You can speed the drying of your drywall patch by using a hair blower! Any hair dryer will work as long as it is portable enough that you can direct the air flow from it over your patch. Keep the air temperature set to low and don't try to dry the patch too quickly or it will crack.
Lastly, you should check the ball c**k of the tank. If the ball c**k washer is worn or damaged, simply remove and replace it. An easy indicator of ball c**k trouble is a float ball that is positioned correctly with a higher than normal water level.
Once you've checked the flapper valve, if the toilet is still running, check the chain. If the length of the chain linking the arm lever to the flapper valve is too short, water will keep running from the tank, as there would be no seal. To remedy this, simply remove the old chain and attach a longer one from a hardware store.
Your home is one of the most valuable resources that you have. It is important to take the time to research and perform updates on your property to maintain its value. Following the advice provided in this article can save you from a lot of frustration, as well as, costly mistakes.
