If you have issues with the plumbing making a hammering sound when you turn it off, check your water pressure. Any time your water pressure is above 80 PSI, you will hear extra water noise. This can be easily solved by the http://wefixwaterheaters.tumblr.com installation of a pressure-reducing valve, which can be done by most homeowners.
Make sure you know where your home's water shutoff is located. You never know when there might be an emergency involving a broken pipe or damaged connection that requires you to turn off the water right away. In addition, knowing where the shutoff is located is vital before you start any plumbing project, in case anything goes wrong.
Place a strainer on top of every drain so that you collect all debris that has the ability to clog the drain. Kitchen sink strainers should be cleaned every time they collect large food particles. The bathtub's strainers need to cleaned out on a regular basis.
A sink hose that is installed incorrectly will lead to water flowing into the dishwasher. You must have the hose going uphill and then down to get rid of the water in the dishwater.
Got a leaky pipe? In many cases you can repair this yourself without the expense of a plumber. If a joint is leaking, tighten it with a pipe wrench. If the leak is coming from a damaged section of pipe, you can try repairing with a store-bought patching kit. One method involves applying waterproof tape to the section of pipe where there is leakage. Before applying the tape, make sure the pipe is thoroughly dry. Make sure that the tape covers two to three inches on either side of the breakage in the pipe.
You can remove unsightly mineral buildup from your shower head by soaking it in vinegar overnight. This loosens the deposits, and in the morning you only need to wipe off the residue with a rag. If your shower head is high up an not removable, place vinegar in a plastic bag, slip the bag over the shower head and hold in place with a twist tie.
Don't start any do-it-yourself plumbing project without having a plan in place. You need to know beforehand exactly what you are getting yourself into. Know what kind of space you are working with and what lines are which. Getting a clear picture early on will make your plumbing project go a lot smoother!
If water is backing up into multiple fixtures all over the house, it is no longer going to be effective for you to use chemicals or a small hand snake. This is evidence of a blockage in the main line, and you must contact a professional to take care of this problem for you.
Make sure that any exposed pipes in your home are insulated, especially those found in crawl spaces on the outside walls of your home. This will help keep them from freezing and causing you tons of problems. Frozen pipes can often be devastating and leave you with problems that are expensive to fix and no water in the middle of winter.
If you are trying to decide on the material to use for your hose, stick with stainless steel. Stainless steel has a very solid construction and stays durable for many years, eliminating the need for replacement. Also, this material is less prone to bursting, which can yield severe plumbing issues.
If the water pressure on your street exceeds 60 pounds, you many want to consider installing a pressure reducing valve. Too much water pressure is actually harmful to your plumbing system and could cause excess water pressure. A pressure reducing valve cuts down your water pressure by almost 50 percent.
http://www.youtube.com/watch?v=SlyStHM9Nr0
If you are having any kind of problems with your water line or plumbing in general then you will first want to cut of your water supply. One of the most common mistakes that people make is to leave their water running while they are trying to fix things and this leads to bigger problems.
Be sure that you check on your water meter when it is not being used. Then, check on the meter 8 hours later. If the meter has changed, even a small amount, this could be a sign that there is an undetected water leak, which can be a severe problem.
To prevent hair from clogging your drains, install strainers in each tub and shower to capture the hairs before they can go down the drain. When combined with soap build-up, hair can bring your drains to a complete standstill, so it's important to prevent the hairs from reaching the pipes in the first place.
While it might help to conserve a bit of water to not flush the toilet after every use or only under certain conditions, regularly flushing toilets can help keep water moving in pipes and prevent freezing. The same holds true for letting water run in sinks as well. If you have rarely used bathrooms in your home, make it point to to flush the toilets and run the faucets on a regular basis.
If your water bill seems unusually high and you haven't changed your water usage, the problem is most likely in the service line. The cost to hire a professional to find and repair the service line most often is far greater than installing a new line and then having the old one shut off permanently.
If you notice water dripping or signs of water staining on your walls, you should immediately turn off your water supply and notify a plumber. This indicates a serious plumbing problem. If unchecked, these issues can lead to mold, mildew or flooding in your home.
The best thing you can do if you smell a foul odor coming from your toilet is to call a plumber. There is a good chance that you may have a sewer backup. Not only can this cause pipe damage, but inhaling the smells from sewer backups is harmful to your help.
As you can see, plumbing isn't such a scary thing, it just requires proper knowledge and instruction. Fixing your own plumbing can save a lot of money. Hopefully this article has given you at least a few of the ideas that you need, so that next time your plumbing has a problem, you can fix it yourself.
