Don't be afraid to call a professional. Don't take on jobs to save money, if you aren't sure how to fix them. Calling a professional plumber saves you money, the experience and know-how can fix your problem sooner and with less fuss.
Find a plumber that you can trust. Make sure to get referrals from friends and family so that you can prevent getting ripped off, which happens often. Also make sure not to pay the plumber before the work is completed. If you do that, there will not be an incentive to get the job completed in a timely manner.
Do not fall for the idea that liquid grease can be easily washed down the drain with hot water. While the grease may flow past the initial drain with the water, it does not take much of a temperature change as it moves through your pipes to alter from liquid to solid. The repeat habit of dumping grease in the sink is a sure-fire way to ensure a hard-to-reach clog forming in the future.
Don't pay a plumber until the job is completed. A plumber may require some money upfront, but it's wise to wait until the job is completely done before giving him the entire payment. Many things can happen between the stop and end of a job, so to be safe wait until you are satisfied with the completed work before paying.
Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about http://www.waterheatersonly.com/ an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.
Don't start any do-it-yourself plumbing project without having a plan in place. You need to know beforehand exactly what you are getting yourself into. Know what kind of space you are working with and what lines are which. Getting a clear picture early on will make your plumbing project go a lot smoother!
If the water is not going into your dishwasher, the first thing you should do is s**t off the water under the sink. Chances are that you have some kind of blockage, and keeping the water turned on could actually create a bigger problem. To fix the blockage, you may need to call a plumber.
If your plumbing is making strange noises you may have lost something called your "air cushion". To turn this back on, you're going to need to turn off your main water supply. Run all faucets in your house and then turn back on your main water supply. This should make everything sound better again.
If you are trying to decide on the material to use for your hose, stick with stainless steel. Stainless steel has a very solid construction and stays durable for many years, eliminating the need for replacement. Also, this material is less prone to bursting, which can yield severe plumbing issues.
In the winter months, if you live somewhere where temperatures fall below freezing, leave your faucets on a little bit to let a thin stream of water through. This will help prevent the pipes from freezing, which could be a major problem for you and all the pipes in your home.
If you have an ice maker or other plumbing going to your refrigerator, every six months or so pull the refrigerator away from the wall and inspect this plumbing. There should be no condensation or corrosion on these plumbing lines, if there is, contact a plumber and have them look at it.
If you live in an environment where winters get cold, it is crucial that you prepare your pipes for the winter. Leaving pipes as is can cause them to freeze which can create severe plumbing issues. Have your faucet open a little bit when it is really cold to prevent frozen pipes.
http://www.youtube.com/watch?v=pqKR1D9gkyg
