|
|
|
|
|
|
|
|
|
 Posted: Mon Jan 10, 2005 3:50 pm
well i kno a lot of people use timmy's(bob long intimidators) but where i go all the poeple there say they're just spyders on steroids i dont kno if its just them but i wanted everyones opinion on timmys.
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Mon Jan 10, 2005 10:31 pm
i dont know much about timmys, but i think they are open bolt stack tubed like a spyder, but i do know that they can definately out-preform a spyder in just about anyway possible, except maybe in ROF, as seeing kingmans new grip frame is rated to up to 30 bps
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Tue Jan 11, 2005 1:16 pm
i love the timmy, and i love the options =) it has 30 different Dbounce settings
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Wed Jan 12, 2005 3:08 am
Well the Intimidator did orginate from the Spyder. As you see pro team Bad Company has but Timmy Trigger Frames on there Spyders. You best shoot is to go see if you can test one out at a local field. I don't really like Timmys that much. I don't see the fact of paying big cash for a Spyder like gun with fancy milling..I could go pick up a 200 dollar Spyder then put a Timmy frame on it and it wouldn't cost me 1000 dollars and I would have a nice tournament level gun..
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Wed Jan 12, 2005 1:49 pm
I personally love timmy's. One, they're very high end markers, with extremely low maintanance. They don't have as many moving parts as say autocockers and angels, meaning there's less that can go wrong with them. You can do almost whatever you want with them, almost everyone makes barrels for them (so that's never a problem), and you can make em EXTREMELY FAST!!! Just look at the Oakland Assassins. Their timmys almost look as if they're shootin laser beams paintballs are comin out of em so fast. They're like a backman's (me) dream. And now that the new Alias is out, it's smaller fram appeals to front men a little bit more.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Thu Jan 13, 2005 3:15 am
Sicon2003 I personally love timmy's. One, they're very high end markers, with extremely low maintanance. They don't have as many moving parts as say autocockers and angels, meaning there's less that can go wrong with them. You can do almost whatever you want with them, almost everyone makes barrels for them (so that's never a problem), and you can make em EXTREMELY FAST!!! Just look at the Oakland Assassins. Their timmys almost look as if they're shootin laser beams paintballs are comin out of em so fast. They're like a backman's (me) dream. And now that the new Alias is out, it's smaller fram appeals to front men a little bit more. Well any marker won't brake down if you properly maintain it.My Dad has had 2 autocockers (Mech and my old e-Orracle) and not one has broken down.There is a guy on my team who has a Timmy and his gun brakes down more then all our other guns. Oakland Assassians are also proably using NXL boards and they use Rippers which have a faster silinoid..Oh yeah the Alias ain't that new any more. Like I said before any gun can brake down you just got to maintain that gun.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Sat Jan 15, 2005 6:51 pm
DraXxuS Well the Intimidator did orginate from the Spyder. As you see pro team Bad Company has but Timmy Trigger Frames on there Spyders. You best shoot is to go see if you can test one out at a local field. I don't really like Timmys that much. I don't see the fact of paying big cash for a Spyder like gun with fancy milling..I could go pick up a 200 dollar Spyder then put a Timmy frame on it and it wouldn't cost me 1000 dollars and I would have a nice tournament level gun.. yeah but an intimidaor is so much more intimidating to your opponent than a spyder, hence the name intimidator
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Sun Jan 16, 2005 5:31 am
Phantom_Renegade DraXxuS Well the Intimidator did orginate from the Spyder. As you see pro team Bad Company has but Timmy Trigger Frames on there Spyders. You best shoot is to go see if you can test one out at a local field. I don't really like Timmys that much. I don't see the fact of paying big cash for a Spyder like gun with fancy milling..I could go pick up a 200 dollar Spyder then put a Timmy frame on it and it wouldn't cost me 1000 dollars and I would have a nice tournament level gun.. yeah but an intimidaor is so much more intimidating to your opponent than a spyder, hence the name intimidator Yeah but the marker don't make the player. There is no need to be intimidated by another marker just the player.. I was shooting out guys with my mech cocker that had Timmys and Angels and other stuff. And now with my Trix I shoot out everyone..The days of accuracy are out and speed is in..Plus your proably a Intimidator lover..I had the chance to buy a Timmy or Trix and I bought a Trix..So what does that say there..I'm very picky over what I shoot..It has to be fast as hell and has to operate like a champ..
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Mon Jan 17, 2005 12:37 am
DraXxuS Phantom_Renegade DraXxuS Well the Intimidator did orginate from the Spyder. As you see pro team Bad Company has but Timmy Trigger Frames on there Spyders. You best shoot is to go see if you can test one out at a local field. I don't really like Timmys that much. I don't see the fact of paying big cash for a Spyder like gun with fancy milling..I could go pick up a 200 dollar Spyder then put a Timmy frame on it and it wouldn't cost me 1000 dollars and I would have a nice tournament level gun.. yeah but an intimidaor is so much more intimidating to your opponent than a spyder, hence the name intimidator Yeah but the marker don't make the player. There is no need to be intimidated by another marker just the player.. I was shooting out guys with my mech cocker that had Timmys and Angels and other stuff. And now with my Trix I shoot out everyone..The days of accuracy are out and speed is in..Plus your proably a Intimidator lover..I had the chance to buy a Timmy or Trix and I bought a Trix..So what does that say there..I'm very picky over what I shoot..It has to be fast as hell and has to operate like a champ.. hmph i shoot my mechanical automag, sure it shoots like hmmm fast enough to give your trix a run for its money, except for my guns accurate for each shot i put out there, and no the days of accuracy are not over for a loser that only uses the "pray and spray method" sure it is, but i take pride in my gun, not because it can shoot ast but because its reliable and accurate, i would take a timmy over a matrix anyday just because its reliable and simple, not like a matrix
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Mon Jan 17, 2005 6:34 am
Personally Ive shot intimidators for about 2 1/2 years now and I love them. They were the first gun to come with the anti-chop eye and that eye is the breakbeam eye(not like the crapy reflective eye thats on a impulse). Intimidators are based of the spyder bolt design but I does not perform like a spyder. The gun was designed around the bolt cycle system with the soleniod operating the bolt cycling and a front lpr regulating the pressure and the electronic board operating the soleniod and lcd features. So in a way they could be a spyder on steriods but also Hooked up to a nuclear reactor and turbocharged. thats a timmy.
Intimidators have come a long way. Personally Ive owned a Classic,2k2, GZ, Lasoya, Naughty dog , and now My Silver Dark Intimidator.
Intimidators are now extremely smooth, The most recent timmies(alias, nd's , dark's etc) have a shorter bolt and ram so there is less bolt travel which means smoother shooting gun and high rof.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Mon Jan 17, 2005 7:52 am
Phantom_Renegade DraXxuS Phantom_Renegade DraXxuS Well the Intimidator did orginate from the Spyder. As you see pro team Bad Company has but Timmy Trigger Frames on there Spyders. You best shoot is to go see if you can test one out at a local field. I don't really like Timmys that much. I don't see the fact of paying big cash for a Spyder like gun with fancy milling..I could go pick up a 200 dollar Spyder then put a Timmy frame on it and it wouldn't cost me 1000 dollars and I would have a nice tournament level gun.. yeah but an intimidaor is so much more intimidating to your opponent than a spyder, hence the name intimidator Yeah but the marker don't make the player. There is no need to be intimidated by another marker just the player.. I was shooting out guys with my mech cocker that had Timmys and Angels and other stuff. And now with my Trix I shoot out everyone..The days of accuracy are out and speed is in..Plus your proably a Intimidator lover..I had the chance to buy a Timmy or Trix and I bought a Trix..So what does that say there..I'm very picky over what I shoot..It has to be fast as hell and has to operate like a champ.. hmph i shoot my mechanical automag, sure it shoots like hmmm fast enough to give your trix a run for its money, except for my guns accurate for each shot i put out there, and no the days of accuracy are not over for a loser that only uses the "pray and spray method" sure it is, but i take pride in my gun, not because it can shoot ast but because its reliable and accurate, i would take a timmy over a matrix anyday just because its reliable and simple, not like a matrix A Matrix is a very relieable marker if you take care of it and lube it and make sure the O-rings are good besides that there isn't much to them..I relube mine about every 4 to 5 cases of paint and replace o-rings when I see wear and I haven't had a problem..Some times it's not the markers fault it can be the owners..I know Timmys are pretty simple guns but so is the Matrix once you get to know it. The most intimidating thing about it is the bolt kit..But I can asemble it blind folded now..I don't know where you got that Matices aren't relieable..And like I said earlier a kid on my team with a Timmy has his Timmy brake down quite abit..And the guy who had the Timmy before the kid never had a problem with the gun but as soon as that kid got it was brought in twice to the shop with in the first month(The guy who had it before him owns a PB Shop). And if you see all the teams now are using speed look at the NXL everyone with there NXL Ramping boards. I like Timmys but I find them a little pricey for only basically milling diffrence and board diffrence..Now tell me if i'm wrong MoNoFxiDe..I was personally I was thinking about getting a Alias for my next marker..Not tring to make Timmys look bad...I like them but I love my Trix..As I said in the Matrix owners I'm going with anything that is a Matrix..Not trying to say your Mag is slow but I had a guy at local field out shoot my Eggy No Z board though and no bounce on my Trix and I can shoot 17 or so at times..
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Mon Jan 17, 2005 4:42 pm
yeah everyone in the NXL wants speed, because there guns are all already really accurate, super air consintency and a sweet barrel and good paint, thats why they want speed, their accuracy is already taken care of
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Tue Jan 18, 2005 5:28 am
Im a gun tech, I ill tell you compaired to other guns Matrix's are not simple guns by any means. I work on them all the time and a timmy is about 5 times easier
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reply
