sunnen_tenshi12
(?)Community Member
- Posted: Thu, 27 Dec 2012 06:08:11 +0000
Starting/Finishing Slots
Whenever you start or finish bumping a slot, make sure you copy the correct form located under the workers page.
Or wherever the codes are located in the shop
Whenever you start or finish bumping a slot, make sure you copy the correct form located under the workers page.
Or wherever the codes are located in the shop
These two are the forms from Cinibun's Bump Shop.
Starting Form
[size=10][b]Starting slot # with 000/000 bumps[/b][/size]
Finishing Form
[size=10][b]Ending slot # with 000/000 bumps
PBC: Personal bump count[/b][/size]
PBC: Personal bump count[/b][/size]
*NOTE* Not all shops have the same form but are somewhat similar to this. Some may be simple and some may contain more decoration or detail.
Filling in the information
Once you've copied the code, paste it into your post.
exp:
start form before entering data
Starting slot # with 000/000 bumps <--- this is what it will look like when you post the code directly on the thread, without making any changes.
start form after entering data
Starting slot 1 with 301/1000 bumps <---this is what it should look like when you post. Don't change anything else besides the slot number and bumps.
finish form before entering data
Ending slot # with 000/000 bumps
PBC: Personal bump count
finish form after entering data
Ending slot 1 with 330/1000 bumps
PBC: 30 <---just like the start, you only fill in what's needed.