Decide where the Winland Humidity Sensor should be installed. It should be located away from any doors or furnace equipment to get a representative reading. You may want to locate it near where your found the highest humidity levels through your humidity monitor.
Find a wall outlet near that location. Connect the Insteon input-output linc to the humidistat following directions that came with both devices. Plug the input-output linc into the wall outlet.
Now place the fan or fans in locations that will provide good air circulation. Plug the fan power cord into an Insteon plug-in appliance switch module; then plug the module into a nearby wall outlet.
Following instructions that came with the products, link input-output linc to the appliance switch and set the humidistat to the humidity level that will activate the fan.
If you want to connect this setup to your Insteon web-enabled central controller, simply link the controller to appliance switch and to the input-output link modules following instructions.
Set the humidistat at the humidity level which will activate the fan and link the input-output linc with the central controller.
Now you can check the status of the humidistat to see whether it Click here to read more. has reached your critical humidity level, or you can control the fan or fans separately using your web-enabled smartphone.
That's it!
magentaprosperi4 Community Member |
|