About
parts to a skateboard: deck: the flat standing surface of a skateboard, usually laminated maple.grip tape: sandpaper affixed to the top of the deck with adhesive, used to increase the friction between the deck and the skater’s feet.
nose: the front of the skateboard, from the front truck bolts to the end.
rail: the edge of the skateboard, also, plastic strips attached to the board’s underside.
tail: the rear of the skateboard, from the back truck bolts to the end
trucks: the front and rear axle assemblies that connect the wheels to the deck and provide the turning capabilities for the board.
wheels: usually made of polyurethane and sized between 39 and 66 millimeters in diameter; their hardness is measured by durometer, a number ranging from 0 to 100—soft wheels have a durometer of about 85, hard wheels have a durometer of 97 or higher.
wheelbase: the distance between the front and back wheels, measured between the two seys of inneromst truck holes.
Comments
View All Comments
▒▒▒▒▒▓
▒▒▒▒▒▒▓
▒▒▒▒▒▒▓
▒▒▒▒▒▒▒▓
▒▒▒▒▒▒▒▓▓▓
▒▓▓▓▓▓▓░░░▓
▒▓░░░░▓░░░░▓
▓░░░░░░▓░▓░▓
▓░░░░░░▓░░░▓
▓░░▓░░░▓▓▓▓
▒▓░░░░▓▒▒▒▒▓
▒▒▓▓▓▓▒▒▒▒▒▓
▒▒▒▒▒▒▒▒▓▓▓▓
▒▒▒▒▒▓▓▓▒▒▒▒▓
▒▒▒▒▓▒▒▒▒▒▒▒▒▓
▒▒▒▓▒▒▒▒▒▒▒▒▒▓
▒▒▓▒▒▒▒▒▒▒▒▒▒▒▓
▒▓▒▓▒▒▒▒▒▒▒▒▒▓
▒▓▒▓▓▓▓▓▓▓▓▓▓
▒▓▒▒▒▒▒▒▒▓
▒▒▓▒▒▒▒▒▓
If you like this Copy and paste to 4 other profiles then press F5 for 500,000gg
sooo.
Lets Talkk?
let it thunda
put a slob
6 feet under
im crip now i got in by my O.G look up LIL BVP