You will be surprised to see only the way to spray car paint actually can be easy. That doesn't mean that you can just grab a tin of paint and go at it. There are some principles you need to understand. Both in the preparation and application.

Step A:

Prepare by gathering all your things that you are going to need. For other regions cover nicely with paper and masking tape.

User Image - Blocked by "Display Image" Settings. Click to show.

Step B:

You'll need to examine the car carefully. These will have to be sanded with 300 grit sand paper. Additionally, it allows the aerosol auto paint to adhere better. Make certain all the dust dirt and debris are taken from the vehicle after you have finished sanding. It is critical the auto be perfectly clean.

Measure C:

This will make sure you get an overall even layer of your coloured paint plus helps the paint to stick nicely. When you spray the primer, ensure you allow for drying in between and apply light coats. The way to spray auto paint takes a little getting used to.

Step D:

Now you might be well to the point at which you happen to be about ready to spray the color. Before you begin with the automobile either way, make several practice strokes on an item. After you happen to be ready, begin the passes with the paint without hesitation. You may end up getting uneven coverage, if you hold the spray can or gun in one place and perhaps the paint will run. If this happens you have an important repair job on your had. You'll most likely have directions regarding how to spray car paint using the gear or spray cans.

Step E:

You may want to study this choice on the web, or check with someone that's comfortable with the way to spray on car paint

Step F:

Once you happen to be absolutely satisfied with the colour, you're down to the finishing touches. You will now want to apply several clear coatings. This will give the gloss and finished look to the car in addition to protect the finish. Probably two coatings will be sufficient but it'll be up to you. Make absolutely sure it's dry in between coats.

Step G:

Yet Alloy Wheel Repair London again, you've got the choice of wet sanding if you prefer. Again, I would recommend you request the guidance of individuals which can be familiar with the way to paint a car. You need with the following grits in this arrangement if you determine to follow this measure then. Use 800, 1000, 1200, 1500 and the finally the 2000. This will remove spots that'll be overly heavy in the clear coating application.

Step H:

Step I:

You should buff the surface. To try this just use a moderate cut polish.

Step J:

As a final touch, you might want to apply a number of coats of wax.