11 Steps to Spray Paint Your car or truck Like the Professionals - Automobile Bodywork Paint Repair
You will be amazed to see just how you can spray car paint actually could be easy. That doesn't mean you can simply grab a tin of paint and go at it. There are a few principles you need to know. Both in use and the preparation.
Prepare by assembling all of your items that you are likely to need. Make sure your surrounding area is shielded against any possible through aerosol. Any parts which don't have to be sprayed and that can be taken away afterward do so. For other areas masking tape and cover well with paper.
You will need to examine the car carefully for any rough spots. In addition, it allows the spray car paint to stick better. After you have finished sanding, make sure all the dust dirt and debris are taken out of the automobile. It is imperative the auto be perfectly clean.
This will ensure you get an overall even layer of your coloured paint plus helps the paint to stick nicely. The way to spray on auto paint takes alloy wheel refurbishment Cheshire a little getting used to.
Now you are pretty well to the point at which you are around able to spray the color. You could have decided to use the spray car paint that comes in aerosol cans, or maybe you've opted for the spray gun. In either case, make several practice strokes on an object before you start together with the car. Once you are prepared, start the passes with all the paint without hesitation. In such a circumstance you've got a major repair job had. You will most likely have instructions about the best way to spray auto paint utilizing spray cans or the equipment.
It's up to you whether you would like to wet sand between coats of primer and colour paints. You might wish to study this option online, or check with someone that is familiar with the best way to spray on car paint
Once you're completely satisfied using the color, you are down to the finishing touches. You may now need to apply several clear coats. This gives the semblance and concluded appearance to the car as well as protect the finish. It is going to be your responsibility although probably two layers will probably be adequate.
Once more, you've the option of wet sanding should you prefer. Again, I suggest you request the help of individuals which might be comfortable with how to spray paint an automobile. You must wet sand together with these grits in this order if you opt to follow this step then. Use 800, 1000, 1200, 1500 and the finally the 2000. This may remove spots that may not be too light in the clear coating application.
Now you will need to employing a rubbing compound so you may use a 2000 grit to remove any scratches to buff the surface.
You must now buff the surface. To do this simply use a moderate cut polish. You should have a perfect glassy look to the finish, once you've done this.
As a final touch, you might need to apply a few coats of wax.