Welcome to Gaia! :: View User's Journal | Gaia Journals

They are available in super easy to check out instructions and can cut by having a a number of materials including paper, foam, capable, vinyl, material and chipboard.

Guidelines for a hot stamping machine

The Cuttlebug is a snap to make use of.

• First of all your lower the platforms at both sides and will also encourage the machine to suction to your workspace. You should always be working away at a flat surface as this may help it suction in your workspace and trim your dies correctly.

• Then it is the perfect time to reduce your die. You ultimately choose your die and put the cutting pads, die and material inside the following order: "A", "B", die while using foam side up, paper with top side facing down, "B".

• Place this in the platform you need to turning using the wheel. It'll feel a little strange the first few times because it makes a large cracking sound the way it comes through the far wall but don't be alarmed since this is normal and your pads aren't cracking!



And there it is, easy as can you've got reduce your own dies to suit your project. A die cutting machine in fact is an inexpensive way to add titles, shapes, numbers etc. in your craft projects.

So as to the "B" pad will appear worse for wear in an exceedingly short time nevertheless is perfectly normal and you may switch it or viceversa and inverted then it gets a level employ all over.

You can also research dies using their company leading manufactures for example Sizzix as they will match the Cuttlebug machine, for your larger Bigz dies you could omit the spacer pad "A" so that they fit throughout the die cutting machine in no time.

Also you can use embossing folders in your die cutting machine with the embossing folder that accompany the appliance. This folder may go in-between each "B" pads using the paper you want to emboss inside embossing folder.

There are lots of tutorials open to provide you with your new die cutting machine should you get stuck or will not be sure ways to use the different brands of dies with your machine.

As much as affordability and flexibility goes this flexo printing machine really tops their email list. I personally use my Cuttlebug machine in nearly every project from scrapbook layouts, kid's crafts, tags and journey page projects. There is a huge variety of die-cuts and embossing folders designed for every project.